Chapter 1: Overview
1-9
•
Power-on mode for AC power recovery
•
Intel
®
Intelligent Power Node Manager (NM) (Avail-
able when the NMView utility is installed in the
system)
•
Manageability Engine (ME)
PC Health
Monitoring
CPU Monitoring
•
Onboard voltage monitors for +1.8V, +3.3V, 3.3VSB,
+5V, +5V Standby, 12V, Memory, Chipset and Bat-
tery Voltage.
•
CPU 5+1 -Phase switching voltage regulator
•
CPU/System overheat LED and control
PC Health
Monitoring
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support
Fan Control
•
Fan status monitoring with firmware 4-pin (Pulse
Width Modulation) fan speed control
•
Low noise fan speed control
LED Indicators
•
System/CPU Overheat LED
•
Suspend-state LED
•
UID/Remote UID LED
System
Management
•
PECI (Platform Environment Configuration Interface)
2.0 support
•
System resource alert via SuperDoctor® III
•
Thermal Monitor 2 (TM2) support
•
SuperDoctor® III, Watch Dog, NMI
•
Chassis Intrusion Header and Detection
Dimensions
•
12.00" (L) x 13.00" (W) (304.80 mm x 330.20 mm)
* CPU Max TDP is subject to chassis and heatsink cooling restrictions. Please check the chassis
and heatsink specifications for proper CPU TDP sizing.
Note
: For IPMI Configuration Instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
Summary of Contents for SuperO X9DRH-7F
Page 1: ...USER S MANUAL Revision 1 1 X9DRH 7F X9DRH iF X9DRH iF NV X9DRH 7TF X9DRH iTF...
Page 68: ...2 44 X9DRH 7F iF iF NV 7TF iTF Motherboard User s Manual Notes...
Page 110: ...A 2 X9DRH 7F iF iF NV 7TF iTF User s Manual Notes...
Page 114: ...B 4 X9DRH 7F iF iF NV 7TF iTF Motherboard User s Manual Notes...
