Supero SUPERO SuperServer 5037MC-H8TRF, User Manual

Page: 56 / 98

6-2
S
UPER
S
ERVER 5037MC-H8TRF User's Manual
6-2 Removing the Chassis Cover
IMPORTANT: Before operating the SC938H for the fi rst time, it is important to re-
move the protective fi lm covering the ventilation openings on the top of the chassis.
These vents provide proper ventilation and cooling for the system.
Removing the Chassis Cover and Protective Film
1. Disconnect the chassis from any power source.
2. Remove the three screws which secure the top cover to the chassis as il-
lustrated above.
3. Lift the top cover up and off the chassis.
4. Peel off the protective fi lm covering the top cover and the top of the chassis
5. Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
Warning: Except for short periods of time, do NOT operate the server
without the cover in place. The chassis cover must be in place to allow
proper air
fl ow and prevent overheating.
Figure 6-1. Removing the Chassis Cover
Remove Three
Screws
Remove Film
From Vents
1
3
1
4
1
2
!