Supero SUPER P4QH6, User Manual

Page: 26 / 86

2-6
S
UPER P4QH8/P4QH6 User’s Manual
Figure 2-2. Populating the MEC
(Four DIMM installation shown)
4. Installing the MEC:
After populating the MEC, carefully install it back into its slot on the
motherboard, making sure it is fully seated. Finish by tightening the two
screws that secure the retention plate to the chassis.
Note: Always install DIMMs from the bottom of the MEC card up and in
groups of four. If four DIMMs are to be installed, you must populate the
four DIMM slots along the bottom of the MEC (as shown in Figure 2-2). If
eight are to be installed, you must populate the eight bottom DIMM slots,
and so on.