Supero SUPER P4QH6, User Manual

Page: 23 / 86

Chapter 2: Installation
2-3
5. Lift the lever on the CPU socket:
lift the lever completely or you will
damage the CPU socket when
power is applied
.
(Install CPU1
first.)
Socket lever
6. Install the CPU in the socket. Make sure
that pin 1 of the CPU is seated on pin 1 of
the socket (both corners are marked with a
triangle). Install a CPU into CPU socket #1
first (you may install 2 or 4 CPUs).
Pin 1
7. Press the lever down until
you hear it *click* into the
locked position.
Socket lever in
locked position
4. Secure the other retention
bracket into position by
repeating Step 3.
8. Apply the proper amount of thermal
compound to the CPU die and place
the heatsink and fan on top of the
CPU.
Heatsink
9. Secure the heatsink by locking the
retention clips into their proper
position.
10. Connect the three wires of
the CPU fan to the respective CPU
fan connector. Repeat steps for
the other three CPUs. For a dual
configuration, install the next CPU
into the CPU4 socket.
CPU fan
connector
CPU fan
w i r e s
Retention clip
CPU