Supero SUPER P4QH6, User Manual

Page: 22 / 86

2-2
S
UPER P4QH8/P4QH6 User’s Manual
IMPORTANT: Always connect the power cord last and always remove it
before adding, removing or changing any hardware components. Make
sure that you install the processor into the CPU socket before you install
the CPU heat sink.
1. Locate the following components, which are included in the shipping
package. The amounts shown are for each CPU.
Retention brackets
(2)
Clips (2)
Screws* (4)
*These screws are for mounting the
motherboard to the CPU retention plate,
which should be placed between the
motherboard and the chassis to secure
the CPUs.
White pegs (4)
2. Insert the white pegs into the
black anchors. Do not force the
white pegs all the way in - only
about 1/3 of the way into the black
anchors.
3. Place a retention bracket in the
proper position and secure it by
pressing pegs into two of the retention
holes until you hear a *click*. The
clicking sound indicates that the peg is
locked and secured in the retention
plate.
Two pegs in
position
One retention bracket in
position
Black anchors (4)
Anchor/peg
assemblies
Processor Support:
Single or Dual: Intel Xeon MP processors to 1.6 GHz. Install processors
into the CPU1 (single) socket or CPU1 and and CPU4 sockets (dual).
Quad: Intel Xeon MP processors to 1.6 GHz.