SC846 Chassis Manual
4-11 Accessing the Backplane
The SC846 chassis backplane is located behind the hard drives and in front of the
front system fans. In order to change jumper settings on the backplane, it may be
necessary to remove the backplane from the chassis.
Removing the Backplane
1. Power down the system, remove the power cords from the back of the power
supplies and remove the chassis cover.
2. Disconnect the cabling to the backplane.
3. Remove the four upper screws securing backplane housing to the chassis
and set these aside for later use.
3
Remove
Four Upper
Screws
4-22
Figure 4-25: Removing the Upper Backplane Housing Screws
