Chapter 4: Chassis Setup and Maintenance
Chapter 4
Chassis Setup and Maintenance
4-1
4-1 Overview
This chapter covers the steps required to install components and perform mainte-
nance on the chassis. The only tool you will need to install components and perform
maintenance is a Phillips screwdriver. Print this chapter to use as a reference while
setting up your chassis.
For SC846B model chassis, see Appendix F of this manual, as the installation
procedures differ for this chassis model.
Review the warnings and precautions listed in the manual before setting up or
servicing this chassis. These include information in Chapter 2: System Safety and
the warnings/precautions listed in the setup instructions.
Safety Warning:
Before performing any chassis setup or maintenance, it is recom-
mended that the chassis be removed from the rack and placed on a stable bench
or table. For instructions on how to uninstall the chassis from the rack, refer to
Chapter 5 Rack Installation in this manual.
