Chapter 4: Chassis Setup and Maintenance
Expansion Card Setup
Figure 4-11: Installing Expansion Cards
The SC846 chassis includes PCI slots for expansion cards.
Installing Expansion Cards in the SC846 Chassis:
1. Power down the system, remove the power cords from the rear of the power
supplies, lay the chassis on a flat surface, and open the chassis cover as
described in Section 4-1.
2. Remove the screw holding the cover in place for each PCI slot you want to
use. Keep this screw for later use.
3. Connect the expansion card to the mother board.
4. Secure each card to the chassis using the card's L bracket and the previously
removed screw.
4-9
PCI Card Slots
