Supero SC748 Series, User Manual

Page: 35 / 90

5-13
Chapter 5: Chassis Setup and Maintenance
Figure 5-14: Removing the Dummy Drive Tray
Secure the hard drive to the tray using four screws. 5.
Insert the hard drive into the chassis. To do this: 6.
7a. Press the hard drive release button to extend the drive tray handle.
7b. Insert the hard drive into the chassis and close the handle to lock the hard
drive into place.
Figure 5-15: Installing the Hard Drive
Drive Tray
Remove the screws holding the drive tray to the dummy drive. 3.
Place a hard drive in the drive tray. 4.
SAS/SATA or SCSI
Hard Drive