Supero SC748 Series, User Manual

Page: 76 / 90

C-11
Appendix C: CSE-M35TQ Mobile Rack Specifications
Installation Procedures
C-8 Tools Needed
The following tools are neeed for the installation of the mobile rack into the chas-
sis:
Phillips head screwdriver
•
Antistatic Strap (recommended)
•
C-9 Important Safety Guidelines
This product should be assembled and/or serviced by qualified and experienced
technicians. To avoid personal injury and property damage, carefully follow the
guidelines listed below.
Before accessing the Mobile Rack:
Turn off all peripheral devices and the power supply connected to the chassis 1.
and unplug all power cords from the system or the wall outlets.
Disconnect all the cables and label the cables for easy identification. 2.
Use a grounded wrist strap designed to prevent static discharge when han- 3.
dling components.
Save all the screws and fasteners for later use. (If necessary, label these 4.
screws or fasteners for easy identification.)
Follow the instructions given in the following section to remove and install the 5.
cooling fan, hard disks and the rear window.