Supero SC512C-260 Series, User Manual

Page: 36 / 66

SC512 Chassis Manual
5-8
Add-on Card/Expansion Slot Setup
SC512 chassis includes a slot for one full height/full length add-on card and a riser
card. The riser card allows the add-on to fit within the small 1U form.
The add-on card slot does not require a screw to hold the card in place.
Figure 5-8: Installing the Expansion Card
Installing Add-on and Expansion Cards
1. Disconnect the power supply, lay the chassis on a flat surface, and open the
chassis cover.
2. Slide the add-on card clip upward.
3. Slide the add-on card slot shield toward the side of the chassis and remove the
Shield.
4. Secure the riser card to the motherboard.
5. Slide the add-on card (with "L" bracket) into the add-on card slot and the riser
card.
6. Replace the add-on card slot clip to secure the add-on card.
Add-on Card Slot Latch
Add-on Card
Slot Shield