Supero AS-1011M-Ni, User Manual

Page: 3 / 100

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the AS-1011M-Ni. Installation
and maintenance should be performed by experienced technicians only.
The AS-101M-Ni is an economical server based on the SC812L-280U 1U rackmount
server chassis and the H8SMU motherboard, which supports a single AMD Opteron
1000 processor in an AM2 socket and up to 8 GB of DDR2-800/667/533 unbuffered
ECC/non-ECC SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the H8SMU motherboard and
the SC812L-280U chassis, which make up the AS-101M-Ni.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the AS-1011M-Ni into a rack
and check out the server confi guration prior to powering up the system. If your
server was ordered without processor and memory components, this chapter will
refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
AS-1011M-Ni.
iii
Preface