Supero 5037A-I, User Manual

Page: 78 / 102

7-12
S
uper
W
orkstation 5037A-I User's Manual
SATA Mode
This item selects the mode for the installed drives. The options are Disabled, IDE
Mode,
AHCI Mode and RAID Mode. The following are displayed depending on
your selection:
IDE Mode
The following items are displayed when IDE Mode is selected:
Serial-ATA Controller 0~1
This feature is used to activate/deactivate the SATA controller, and sets the
compatibility mode. The options are Disabled, Enhanced and
Compat-
ible. The default of Serial-ATA Controller 1 is Enhanced .
AHCI Mode
The following items are displayed when AHCI Mode is selected:
Aggressive Link Power Management
This feature Enables or Disables Agressive Link Power Management
support for Cougar Point B0 stepping and later. The options are
Enabled
and Disabled.
Port 0~5 Hot Plug
Set this item to Enabled to enable hot-plugging for the particular port.
The options are
Enabled
and Disabled.
Staggered Spin Up
Set this item to Enabled to enable Staggered Spin-up support. The
options are Enabled and
Disabled .
RAID Mode
The following items are displayed when RAID Mode is selected:
Port 0~5 Hot Plug
Set this item to Enabled to enable hot-plugging for the particular port.
The options are
Enabled and Disabled.