B-6
X6DVL-G/X6DVL-EG
User’s Manual
Checkpoint Code
Description
60h
The DMA page register test passed. Performing the DMA Control-
ler 1 base register test next.
62h
The DMA controller 1 base register test passed. Performing the
DMA controller 2 base register test next.
65h
The DMA controller 2 base register test passed. Programming
DMA controllers 1 and 2 next.
66h
Completed programming DMA controllers 1 and 2. Initializing the
8259 interrupt controller next.
67h
Completed 8259 interrupt controller initialization.
7Fh
Extended NMI source enabling is in progress.
80h
The keyboard test has started. Clearing the output buffer and
checking for stuck keys. Issuing the keyboard reset command
next.
81h
A keyboard reset error or stuck key was found. Issuing the key
board controller interface test command next.
82h
The keyboard controller interface test completed. Writing the com-
mand byte and initializing the circular buffer next.
83h
The command byte was written and global data initialization has
completed. Checking for a locked key next.
84h
Locked key checking is over. Checking for a memory size mis-
match with CMOS RAM data next.
85h
The memory size check is done. Displaying a soft error and check
ing for a password or bypassing WINBIOS Setup next.
86h
The password was checked. Performing any required program
ming before WINBIOS Setup next.
87h
The programming before WINBIOS Setup has completed.
Uncompressing the WINBIOS Setup code and executing the
AMIBIOS Setup or WINBIOS Setup utility next.
88h
Returned from WINBIOS Setup and cleared the screen. Perform
ing any necessary programming after WINBIOS Setup next.
89h
The programming after WINBIOS Setup has completed. Displaying
the power on screen message next.
8Bh
The fi rst screen message has been displayed. The
<WAIT...>
message is displayed. Performing the PS/2 mouse check and
extended BIOS data area allocation check next.
8Ch
Programming the WINBIOS Setup options next.
8Dh
The WINBIOS Setup options are programmed. Resetting the hard
disk controller next.
8Fh
The hard disk controller has been reset. Confi guring the fl oppy
drive controller next.
91h
The fl oppy drive controller has been confi gured. Confi guring the
hard disk drive controller next.
