Chapter 1: Introduction
1-5
Jumper
Description
Default
Setting
J13
SMB Data to PCI Enable
Closed (Enabled)
J15
SMB Clock to PCI Enable
Closed (Enabled)
JBT1
Clear CMOS
See Chapter 2
JPF
Force Power On Enable
Open (Disabled)
JPG1
(*Note)
Video
Enable
Closed
(Enabled)
JPL1
LAN1
Enable
Pins
1-2
(Enabled)
JAR
Alarm
Reset
Open
(Disabled)
JWD
Watch
Dog
Enable
Pins
1-2
(Reset)
Connector
Description
ATX PWR (pw1)
Primary 24-pin ATX PWR Connector
CPU PWR (PWR2)
12V 8-pin CPU PWR Connector
COM1(J4)/COM2 (J5)
COM1/COM2 Serial Port Connectors
DS1-2, DS4-5
Onboard LED Indicators (*See Chapter 2)
DS7, DS8
POST Code LED (*See Appendix A)
DS9
System LED Indicators (*See Chapter 2)
DIMM#1A-#2B
Memory (DIMM) Slots#(1A,1B, 2A,2B)
FAN#1-#6
CPU/Chassis
Fans
Headers
Floppy (J24)
Floppy Disk Drive Connector
FP Ctlr (JF1)
Front Panel Control (* See Chapter 2)
GLAN (JLAN1)
G-bit Ethernet Port
IDE1, IDE2
IDE #1/2 Hard Disk Drive Connectors
JF2
Speaker, PWR LED, Keylock (*See Chapter 2)
JL1
Chassis
Intrusion
Header
JSLED SATA
LED
Header
Keyboard/Mouse (J2)
PS2 Keyboard/Mouse Ports
Printer (J10)
Parallel (Printer) Port
PWR Fault (PW4)
Power Fault Header
SMB PWR (PW3)
Power System Management
PCI Slots#1-3
PCI 32-bit 33MHz slots (*3 slots:X6DVL-G, 2 slots:
X6DVL-EG)
PCI-XSlots#4-5
PCI-X 64-bit 66MHz slots
PCI-E6
PCI-Express x16 @4GB/s slot
H-SATA 0/1 (JS0/JS1)
Hance Rapids-Serial ATA Ports 0/1
WOL(JWOL)
Wake-on-LAN
WOR (JWOR)
Wake-on-Ring Header
USB 0/1(J3)
Back Panel Universal Serial Bus Ports
USB 2/3 (J42)
Front Panel Universal Serial Bus Ports
VGA (J6) (*Note)
Video Graphics Connector
(*Note: X6DVL-EG Only)
Quick Reference ( X6DVL-G/X6DVL-EG)
