Chapter 4: AMI BIOS
4-19
Quick Boot
Select Enabled to allow the AMI BIOS to skip certain test during POST in order
to shorten the time needed for the system to boot up. The options are
Enabled
and Disabled.
Quiet Boot
This feature allows the user to decide whether to display POST messages or to
display the OEM logo. The default setting is
Enabled
. Select Disabled to allow
the computer system to display the POST messages. Select Enabled to allow the
computer system to display the OEM logo.
Add-On ROM Display Mode
Set this option to display add-on ROM (read-only memory) messages. The default
setting is
Force BIOS
. Select Force BIOS to allow the computer system to force a
third party BIOS to display during system boot. Select Keep Current to allow the
computer system to display the BIOS information during system boot. The options
are
Force BIOS
and Keep Current.
Boot up Num-Lock
Set this value to allow the Number Lock setting to be modifi ed during boot up. The
default setting is
On
.
The options are On and Off.
PS/2 Mouse Support
Set this value to allow the PS/2 mouse support to be modifi ed.
The options are
Auto
, Enabled and Disabled.
Wait for ‘F1’ If Error
Select Enable to activate the function of Wait for F1 if Error. The options are
En-
abled
and Disabled.
Hit ‘DEL’ Message Display
Select Enabled to display Setup Message when the user hits the DEL key. The
options are
Enabled
and Disabled.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and
Disabled
.
Quiet Boot Progress Bar
Enable this function to allow the system to display a graphic bar to show the prog-
ress of POST if the item-Quiet Boot (above) has been enabled. The options are:
Enable and
Disabled
.
