Supermicro X6DVL-EG User Manual Download Page 64

Page: 64 / 108

4-12

X6DVL-G/X6DVL-EG

User’s Manual

NorthBridge Conﬁ guration

This feature allows the user to conﬁ gure the settings for Intel E7320 Lindenhurst

VS NorthBridge chipset.

Memory Remap Feature

Select Enabled to allow remapping of overlapped PCI memory above the total

physical memory. The options are

Enabled

and Disabled.

Memory Mirroring and Sparing

Select Enabled to enable Memory RAS (-Mirroring and Sparing) to allow the

system to create a mirror copy of data written to the memory for data security.

The options are

Disabled

and Enabled.

SouthBridge Conﬁ guration

This feature allows the user to conﬁ gure the settings for Intel ICH SouthBridge

chipset.

CPU B.I.S.T. Enable

Select Enabled to enable the function of CPU Built In Self Test. The options are

Enabled and

Disabled

ICH Delayed Transaction

Select Enabled to enable the function of ICH Delayed Transaction to provide back-

compatibility for slower components. The options are

Enabled

and Disabled.

ICH DCB Enable

Select Enabled to enable ICH DMA Collection Buffer. The options are

Enabled

and Disabled.

Summary of Contents for X6DVL-EG













































































































Search results

Summary of Contents for X6DVL-EG

Reviews:

Related manuals for X6DVL-EG

Brands by name

Popular brands

Supermicro X6DVL-EG, User Manual

Search results

Summary of Contents for X6DVL-EG

Reviews:

Related manuals for X6DVL-EG

Brands by name

Popular brands