Supermicro X6DVL-EG User Manual Download Page 72

Page: 72 / 108

4-20

X6DVL-G/X6DVL-EG

User’s Manual

Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot De-

vice.

The settings are 1st Floppy Drive, CD ROM, HDD, and Disabled. The default

settings are:

· 1st boot device –1st Floppy Drive

· 2nd boot device – CD ROM

· 3rd boot device – HDD

· 4th boot device – IBA GE Slot 02180

Hard Disk Drives

This feature allows the user to specify the Boot sequence from available Hard

Drives.

1st Drive/2nd Drive/3rd Drive

Specify the boot sequence for 1st Hard Drive. The options are HDD and

Disabled.

Removable Drives

This feature allows the user to specify the Boot sequence from available Remov-

able Drives.

1st Drive

Specify the boot sequence for 1st Removable Drive. The options are

1st Floppy

Drive

and Disabled.

CD/DVD Drives

This feature allows the user to specify the boot sequence from available CDROM

Drives.

1st Drive

Specify the boot sequence for 1st Hard Drive. The options are

CD ROM

and

Disabled.

Summary of Contents for X6DVL-EG













































































































Search results

Summary of Contents for X6DVL-EG

Reviews:

Related manuals for X6DVL-EG

Brands by name

Popular brands

Supermicro X6DVL-EG, User Manual

Search results

Summary of Contents for X6DVL-EG

Reviews:

Related manuals for X6DVL-EG

Brands by name

Popular brands