Supermicro X5DPL-TGM, User Manual

Page: 33 / 102

Chapter 2: Installation
2-11
Extra Universal Serial Bus
Headers
T h r e e U S B h e a d e r s : F P U S B 0 /
1 ( J D 2 ) a n d U S B 2 ( J 2 7 ) a r e i n -
c l u d e d o n t h e m o t h e r b o a r d .
FPUSB0/1 were designed to pro-
vide front side USB access. You
will need a USB cable (not in-
cluded) for these headers. Refer
to the tables on the right for pin
definitions.
Pin
Number
2
4
6
8
10
Definition
Power
-
+
Ground
Key
USB2 Pin
Definitions (JD2)
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2(J28) keyboard and
the PS/2 mouse are located on J9.
See the table on the right for pin
definitions. (The mouse port is
above the keyboard port. See Fig-
ure 2-3.)
PS/2 Keyboard
and Mouse Port
Pin Definitions
(J9)
Pin
Number
1
2
3
4
5
6
Definition
Data
NC
G round
VCC
Clock
NC
Serial Ports
The COM1(J8) serial port is lo-
cated under the parallel port (see
Figure 2-3). See the table on the
right for pin definitions. The COM2
(J26) connector is a header lo-
cated near the PCI-X #1 slot on the
motherboard.
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 DCD
2 DSR
3 Serial In
4 RTS
5 Serial Out
Pin Number Definition
6 CTS
7 DTR
8 RI
9 G round
10 NC
LAN (Ethernet) Ports
T w o E t h e r n e t P o r t s : ( o n e G b i t
LAN-JP3 and an Mb 10/100 LAN-
JD3) are located beside the VGA
port on the IO backplane. These
ports accept RJ45 type cables.
See Figure 2-3 for port definitions.