Supermicro X5DPL-TGM, User Manual

Page: 56 / 102

4-10
S
UPER X5DPL-TGM User’s Manual
Serial Port A
This setting allows you to assign control of serial port A. The options
are Enabled (user defined), Disabled, and Auto (BIOS controlled or OS
Controlled.)
Base I/O Address
Select the base I/O address for serial port A. The options are 3F8 ,
2F8, 3E8 and 2E8.
Interrupt
Select the IRQ (interrupt request) for serial port A. Options are IRQ3
and
IRQ4 .
Serial Port B
This setting allows you to assign control of serial port B. The options
are Enabled (user defined), Disabled, Auto (BIOS controlled or OS
Controlled).
Mode
Specify the type of device that will be connected to serial port B.
Options are Normal and IR (for an infrared device).
Base I/O Address
Select the base I/O address for serial port B. The options are 3F8,
2F8 , 3E8 and 2E8.
Interrupt
Select the IRQ (interrupt request) for serial port B. Options are IRQ3
and IRQ4.
Watch Dog
This setting is used to enable or disabled the Watch Dog Timer function.
It must be used in conjunction with the JP37 jumper (see Chapter 2 for
details). Options are Enabled and Disabled .
KBC Clock Input
Use this setting to select the keyboard clock rate. Options are 6 MHz, 8
MHz and 12 MHz .