Supermicro X5DPL-TGM, User Manual

Page: 59 / 102

Chapter 4: BIOS
4-13
Event Log Validity
This is a display, not a setting, informing you of the event log validity.
Event Log Capacity
This is a display, not a setting, informing you of the event log capacity.
View DMI Event Log
Highlight this item and press <Enter> to view the contents of the DMI
event log.
Event Logging
This setting allows you to Enable or Disable DMI event logging.
ECC Event Logging
This setting allows you to Enable or Disable ECC event logging.
Mark DMI Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear All DMI Event Logs
This setting will clear all DMI event logs when set to Yes. Options are
Yes and No .
! ! ! ! !
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
Specifies to redirect the console to On-board COMA or On-board COMB.
This setting can also be Disabled .
BAUD Rate
Select the BAUD rate for console redirection. The options are: 300, 1200,
2400, 9600, 19.2K , 38.4K, 57.6K, and 115.2K.
Console Type
Choose from the available options to select the console type for console
redirection. The settings are VT100, VT100, 8bit, PC ANSI, 7 bit, PC
ANSI , VT100+, VT-UTF8.
Flow Control
Choose from the available options to select the flow control for console
redirection. The settings are None, X0N/XOFF, CTS/RTS .