Supermicro X5DPL-TGM, User Manual

Page: 87 / 102

Appendix C: Software Installation
C-7
Configuring Internet Explorer for Local Management
When using the High security setting, you must enable the following settings
manually:
* JavaScript
* Cookies (not stored)
You do not need to enable the following custom level security settings for
the local Intranet in Internet Explorer 5 and 5.5. Select Tools > Internet
Options to access these settings:
* Active Scripting
* Allow per session cookies (not stored)
(*Note: In Internet Explorer 6.0 there is no security setting for cookies. Cookie
configuration was removed from the Privacy tab. There is no setting for
blocking Intranet cookies.)
If you are using a proxy server to access the Internet, you must bypass the
proxy server to access the Adaptec Storage Manager Web server. To verify
whether you are using a proxy server:
1. From the Internet Option window, click the Connections tab.
2. Click LAN Settings.
* If the Use a proxy server box isn’t checked, exit by clicking OK. You aren’t
using a proxy server, so ignore this setting.
* If the Use a proxy server box is checked, make sure the Bypass proxy
server for local addresses box is also checked. Then, click the Advanced
button. In the Exceptions window, enter localhost as an entry.You are now
ready to proceed to
the section-"Using Adaptec Storage Manager – Browser
Edition" .
Configuring Internet Explorer for Remote Management
If you know the IP address of the system you want to manage remotely:
1. Choose Tools > Internet Options > Connections > LAN Settings.
2. Select Use a proxy server for your LAN > Advanced.
3. In the Exceptions section, type the managed system’s IP address.
Configuring Netscape Navigator for Local Management
(*Note: These instructions apply specifically to version 7 and may differ in
later versions.)
To configure Netscape Navigator:
1. Log in to your computer with administrator access.
2. Select Edit > Preferences.
3. In the Preferences window, click the right arrow on the Privacy and
Security line. Ensure that one of the Enable cookies options is selected.
4. Select the Advanced line. Ensure that Enable Javascript for Navigator is
checked.
5. Exit Navigator, then restart it. This enables any settings you have
modified.