Supermicro X5DA8, User Manual

Page: 38 / 92

2-8
SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual
Power LED
The Power LED connection is lo-
cated on pins 15 and 16 of JF2.
Refer to the table on the right for
pin definitions.
ATX Power Supply 24-pin Connector
Pin Definitions
Pin Number Definition
13
+3.3V
14 -12V
15 COM
16 PS_ON#
17 COM
18 COM
19 COM
20 Res(NC)
21 +5V
22 +5V
23 +5V
24 COM
Pin Number Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PW R_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
2-5 Connecting Cables
ATX Power Connector
The main power supply connector
on the X5DA8/X5DAE/X5DAL-G/
X 5 D A L - T G 2 m e e t s t h e S S I
(Superset ATX) 24-pin specifica-
tion, however it also supports a
20-pin power supply connector.
Make sure that the orientation of
the connector is correct. See the
table on the right for pin defini-
tions.
Pins
1 thru 4
5 thru 8
Definition
Ground
+12v
8-Pin +12v Power Supply
Connector (J15)
NMI Button
The non-maskable interrupt button
header is located on pins 19 and
20 of JF2. Refer to the table on
the right for pin definitions.
Pin
Number
19
20
Definition
Control
Ground
NMI Button Pin
Definitions (JF2)
Pin
Number
15
16
Definition
Vcc
Control
PW R_LED Pin Definitions
(JF2)
Processor Power
Connector
In addition to the Primary ATX
power connector (above), the 12v
8-pin Processor connector at J15
must also be connected to your
power supply. See the table on
the right for pin definitions.