Supermicro X5DA8, User Manual

Page: 70 / 92

4-10
SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual
I/O Device Configuration
Access the submenu to make changes to the following settings.
Serial Port A
This setting allows you to assign control of serial port A. The options
are Enabled (user defined), Disabled and Auto (BIOS controlled).
Base I/O Address
Select the base I/O address for serial port A. The options are 3F8 ,
2F8, 3E8 and 2E8.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The
settings are Enabled and Disabled .
Local Bus IDE Adapter
Use this setting to enable the integrated local bus IDE adapter. Options
are Disable, Primary, Secondary and Both .
USB Device 9, Function 7
This setting controls USB functionality. Options are Disabled and
Enabled.
SMART Monitoring
Self-Monitoring Analysis and Reporting Technology (SMART) can help
predict impending drive failures. Select " Auto " to allow BIOS to auto
detect hard disk drive support. Select "Disabled" to prevent the BIOS
from using S.M.A.R.T. Select "Enabled" to allow the BIOS to use
S.M.A.R.T. to support hard disk drives.
Clock Spectrum
When enabled, Clock Spectrum spreads the clock frequency to enable
more stable operation in environments where EMI is causing interference.