Supermicro X12DPG-AR User Manual Download

Page: 157 / 183

Chapter 4: BIOS

157



Intel® I350 Gigabit Network Connection

Note

: The Interface ID "3C:EC:EF:1D:16:51" is for illustration only. It is unique per

system. When you select this menu and press <Enter>, the following items will display:



NIC Configuration

Link Speed

This feature displays the connection speed of a LAN port specified by the user.

Wake On LAN

If this feature is set to Enabled, the LAN port specified by the user will be enabled when the system is powered on. The

options are

Enabled

and Disabled.

Blink LEDs

This feature displays the number of blinking LED indicators of the LAN port specified by

the user.
The following information will be displayed as well:

•

UEFI Driver

•

Adapter PBA

•

Chip Type

•

PCI Device ID

•

PCI Bus:Device:Function:

•

Link Status

•

Factory MAC Address

•

Alternate MAC Address

Summary of Contents for X12DPG-AR
























































































































































































Search results

Summary of Contents for X12DPG-AR

Reviews:

Related manuals for X12DPG-AR

Brands by name

Popular brands

Supermicro X12DPG-AR, User Manual

Search results

Summary of Contents for X12DPG-AR

Reviews:

Related manuals for X12DPG-AR

Brands by name

Popular brands