Super X12DPG-AR User's Manual
106
VMD Port 5A/VMD Port 5B/
Select Enable to enable Intel Volume Management Device Technology support for the root
port specified. The options are
Disable
and
Enable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified by the user, which will
allow the user to change the devices on those root ports without shutting down the system.
The options are
Disable
and Enable.
VMD for Direct Assign
Select Enable to enable VMD for Direct Assign for the root port specified. The options are
Disable
and Enable.
PCI-E ASPM Support (Global)
Select Enabled to enable ASPM (Active State Power Management) support for all
downstream devices of the drive installed on a PCI-E slot. The options are
No
, Per-Port,
and L1 Only.
IIO eDPC (Enhanced Downstream Port Containment) Support
Use this feature to configure the setting for IIO Enhanced Downstream Port Containment
(eDPC) support for your system in an effort to improve the error containment capacity within
the PCIe subsystem when an uncorrected error is detected either at the root port or at the
switch downstream port. Select Disable to disable IIO eDPC support. Select On Fatal Error
to enable IIO eDPC support in your system when a fatal error occurs. Select On Fatal and
Non-Fatal Error to enable IIO eDPC support when an error, fatal or non-fatal, has occurred.
The options are
Disable
,
On Fatal Error, and "On Fatal and Non-Fatal Errors".
*If this feature is set to On Fatal Error/On Fatal and Non-Fatal Errors, the following features
will be displayed:
IIO eDPC Interrupt (Available when "IIO eDPC Support" is set to On Fatal Error/On
Fatal and Non-Fatal Errors)
Select Enable to enable IIO eDPC Interrupt support. The options are Disable and
Enable
.
IIO eDPC ERR_COR (Error Correction) Message (Available when "IIO eDPC
Support" is set to On Fatal Error/On Fatal and Non-Fatal Errors
If this feature is set to Enable, an IIO eDPC error correction message will be displayed.
The options are Disable and
Enable
.
