Super X12DPG-AR User's Manual
122
Serial Port for Out-of-Band Management/Windows Emergency Management
Services (EMS)
The feature allows the user to configure Console Redirection settings to support Out-of-
Band Serial Port management.
Console Redirection (for EMS)
Select Enabled to use a COM port specified by the user for EMS Console Redirection. The
options are
Disabled
and Enabled
.
*If the feature above is set to Enabled, the following items will become available for user's
configuration:
Console Redirection Settings (for EMS)
Out-of-Band Management Port
This feature selects a serial port in a client server to be used by the Windows Emergency
Management Services (EMS) to communicate with a remote host server. The options are
COM1
and COM2/SOL.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII character set. Select VT100+ to add color and function
key support. Select ANSI to use the extended ASCII character set. Select VT-UTF8 to use
UTF8 encoding to map Unicode characters into one or more bytes. The options are VT100,
VT100+,
VT-UTF8
, and
ANSI.
Bits Per Second EMS
This feature sets the transmission speed for a serial port used in Console Redirection. Make
sure that the same speed is used in both the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 57600, and
115200
(bits per second).
Flow Control EMS
Use this feature to set the flow control for Console Redirection to prevent data loss caused
by buffer overflow. Send a "Stop" signal to stop data-sending when the receiving buffer
is full. Send a "Start" signal to start data-sending when the receiving buffer is empty. The
options are
None,
Hardware RTS/CTS, and Software Xon/Xoff.
The setting for each of these features is displayed:
•
Data Bits
•
Parity
•
Stop Bits
