Super X12DPG-AR User's Manual
110
SATA RAID Option ROM/UEFI Driver (Available when "Configure SATA as" is set to
RAID)
Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for
system boot. The options are Disable,
EFI
, and Legacy.
SATA Port 0 - SATA Port 7
Hot Plug
Select Enable to support Hot-plugging for the device installed on a selected SATA port
which will allow the user to replace the device installed in the slot without shutting down
the system. The options are
Disable and
Enable
.
Spin Up Device
Select Enable for Staggered Spin Up support which will allow the SATA devices specified by
the user to spin up one at a time at boot up in an effort to prevent all hard drive disks from
spinning up at the same time, causing a power surge. The options are
Disable
and
Enable.
SATA Device Type
Use this feature to specify if the device installed on the SATA port specified by the user
should be connected to a Solid State drive or a Hard Disk Drive. The options are
Hard
Disk Drive
and Solid State Drive.
