Supermicro SUPERSERVER 6036ST-6LR, User Manual, Page: 93 / 110

Chapter 7: BIOS
7-15

Remote Access Confi guration
Remote Access
This allows the user to enable or disable Remote Access support. The options are
Disabled and
Enabled
. If this item is Enabled, the following items will display:
Serial Port Number
This feature allows the user decide which serial port to be used for Console Redi-
rection. The options are COM 1
and
COM 2
.
Base Address, IRQ
This item displays the based address and IRQ of the serial port speci fi ed above.
The default setting is
2F8h, 3
.
Serial Port Mode
This feature allows the user to set the serial port mode for Console Redirection.
The options are
115200 8, n 1
; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and
9600 8, n, 1.
Flow Control
This feature allows the user to set the fl ow control for Console Redirection. The
options are
None
, Hardware, and Software.
Redirection After BIOS POST
Select Disabled to turn off Console Redirection after Power-On Self-Test (POST).
Select Always to keep Console Redirection active all the time after POST. (Note:
This setting may not be supported by some operating systems.) Select Boot Loader
to keep Console Redirection active during POST and Boot Loader. The options
are Disabled, Boot Loader, and
Always
.
Terminal Type
This feature allows the user to select the target terminal type for Console Redirec-
tion. The options are
ANSI
, VT100, and VT-UTF8.
VT-UTF8 Combo Key Support
A terminal keyboard de fi nition that provides a way to send commands from a remote
console. Available options are
Enabled
and Disabled.
Sredir Memory Display Delay
This feature de fi nes the length of time in seconds to display memory information.
The options are
No Delay,
Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.