Supermicro SUPERSERVER 6036ST-6LR, User Manual, Page: 80 / 110

7-2
S
UPER
S
ERVER 6036ST-6LR User's Manual
Starting the Setup Utility
Normally, the only visible Power-On Self-Test (POST) routine is the memory test.
As the memory is being tested, press the <Delete> key to enter the main menu of
the AMI BIOS Setup Utility. From the main menu, you can access the other setup
screens. An AMI BIOS identi
fi cation string is displayed at the left bottom corner of
the screen below the copyright message.
Warning!
Do not upgrade the BIOS unless your system has a BIOS-related issue.
Flashing the wrong BIOS can cause irreparable damage to the system. In no event
shall Supermicro be liable for direct, indirect, special, incidental, or consequential dam-
ages arising from a BIOS update. If you have to update the BIOS, do not shut down
or reset the system while the BIOS is updating. This is to avoid possible boot failure.
7-2 Main Setup
When you fi rst enter the AMI BIOS Setup Utility, you will enter the Main setup screen.
You can always return to the Main setup screen by selecting the Main tab on the
top of the screen. The Main BIOS Setup screen is shown below.
System Overview:
The following BIOS information will be displayed:
System Time/System Date
Use this option to change the system time and date. Highlight
System Time
or
Sys-
tem Date
using the arrow keys. Key in new values through the keyboard and press
<Enter>. Press the <Tab> key to move between fi elds. The date must be entered in
Day MM/DD/YY format. The time is entered in HH:MM:SS format. (
Note:
The time
is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.)