Supermicro SUPERSERVER 5028TK-HTR, User Manual

Page: 57 / 138

Chapter 5: Advanced Serverboard Setup
5-7
K1SPi/K1SPi-T Quick Reference
Jumper Description Default Setting
JBT1 Clear CMOS/Reset BIOS Configuration See Section 5-9
JPB1 BMC Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 (K1SPi) GLAN1/GLAN2 Enable/Disable Pins 1-2 (Enabled)
JPL1 (K1SPi-T) 10G LAN1/10G LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 Manufacture Mode (ME) Select Pins 1-2 (Normal)
JWD1 Watch Dog Pins 1-2 (Reset)
Connector/Port Description
COM1 Serial Port Header
JF1 Proprietary PMBus Connector
JHFI1 Host Fabric Interface (HFI) Sideband Connection Header
JPTM1 TPM (Trusted Platform Module)/Port 80
JSTBY1 P5V (+5V) Standby Power Connector
LAN1/LAN2
Gigabit (GLAN) Ethernet Port (K1SPi)
10G LAN (TLAN) Ethernet Port (K1SPi-T)
(IPMI) LAN Dedicated IPMI LAN Port
SXB1
CPU PCI-E 3.0 x16 Slot for S-SATA0/1 support (with proprietary
riser card only)
SXB2
CPU PCI-E 3.0 x4 Slot for I-SATA0-5 support (with proprietary
riser card only)
SXB3 PCI-E 3.0 x16
S-SATA2/3 Powered SATA DOM Connectors
USB0/1 Backpanel USB 3.0 Ports
USB2 Type A USB 3.0 Connector
USB3 Type A USB 3.0 Connector
UID SW Unit Identifier Switch
VGA Backpanel VGA Port
LED Description State
UID_LED1 UID (Unit Identifier) LED) Blue: (On/Blinking) Unit Identified
LEDM1 BMC Heartbeat LED Green (Blinking): BMC Normal