Supermicro SUPERSERVER 5028TK-HTR, User Manual, Page: 13 / 138

1-3
Chapter 1: Introduction
I/O Ports
Each of the four K1SPi/K1SPi-T serverboards in the system include two USB 3.0
ports, an IPMI LAN port and a VGA port.
Note: For IPMI configuration instructions, please refer to the Embedded BMC
Configuration User's Guide available at http://www.supermicro.com/support/
manuals/.
Graphics Controller
The K1SPi/K1SPi-T features an integrated ASpeed 2400 BMC with an integrated
VGA/2D graphics controller.
1-3 Server Chassis Features
The following is a general outline of the main features of the server
chassis.
System Power
The chassis includes a redundant, high-efficiency 80-plus Platinum
certified power supply rated at 2000 Watts (one active and one backup power supply
module). In the event your power supply fails, replacement is simple and can be
accomplished without tools.
Front Control Panel
The -R2K04BP2 chassis includes four front panels on the handles of the
chassis which control each of the nodes. Each control panel on the SuperServer
5028TK-HTR/HTTR provides you with system monitoring and control for one server
node. LEDs indicate system power, HDD activity, network activity, system overheat
and power supply failure. A main power button and a system reset button are also
included.
Cooling System
The chassis includes four 8-cm system fans, which are powered from
the backplane.