Supermicro SuperServer 2029UZ-TN20R25M User Manual Download

Page: 105 / 166

Chapter 6: BIOS

105



Discard Changes and Exit

Select this feature to discard the changes you have made and exit from the system.



Delete Certification

If this feature is set to Enable, the certificate enrolled in the system will be deleted. The

options are Enable and

Disable



iSCSi Configuration

iSCSI Initiator Name

This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.

Once the name of the iSCSI Initiator is entered into the system, configure the proper settings

for the following features.



Add an Attempt



Delete Attempts



Change Attempt order



Intel® Virtual RAID on CPU

This submenu displays the information of the Intel VMD controllers as detected by the BIOS.



Intel® Optane(TM) DC Persistent Memory Configuration

(Available when a DCPMM device is plugged in)

This submenu configures DCPMM device parameters and displays driver version.

Note

: All DCPMM items and strings displayed on the BIOS screen are provided by Intel and

may vary with the driver version.

Version:

1.0.0.3380

Select an action below.

Detected DIMMs:

This feature displays the number of DIMMs as detected by the system.

All DIMMs are healthy.



DIMMs

This feature configures and displays the information of a selected DCPMM.

Summary of Contents for SuperServer 2029UZ-TN20R25M







































































































































































Search results

Summary of Contents for SuperServer 2029UZ-TN20R25M

Reviews:

Related manuals for SuperServer 2029UZ-TN20R25M

Brands by name

Popular brands

Supermicro SuperServer 2029UZ-TN20R25M, User Manual

Search results

Summary of Contents for SuperServer 2029UZ-TN20R25M

Reviews:

Related manuals for SuperServer 2029UZ-TN20R25M

Brands by name

Popular brands