Supermicro SuperServer 2029UZ-TN20R25M User Manual Download

Page: 88 / 166

SuperServer 2029UZ-TN20R25M User's Manual



Intel® VMD Technology



Intel

VMD for Volume Management Device on CPU1

Intel® VMD for Volume Management Device for PStack0

Select Enable to use the Intel Volume Management Device Technology for this stack.

The options are

Disable

and Enable.

*If this feature is set to

Enable

, the following features are available:

P1_NVMe0 VMD

Select Enable to use the Intel Volume Management Device Technology for this
device. The options are

Disable

and Enable.

P1_NVMe1 VMD

Select Enable to use the Intel Volume Management Device Technology for this
device. The options are

Disable

and Enable.

Hot Plug Capable

Use this feature to enable the hot plug support for PCIe root ports 1A–1D. The
options are

Disable

and Enable.

Intel® VMD for Volume Management Device for PStack1

Select Enable to use the Intel Volume Management Device Technology for this stack.

The options are Disable and

Enable

*If this feature is set to

Enable

, the following features are available.)

AOC-2UR68-M2TS SLOT1 VMD

Select Enable to use the Intel Volume Management Device Technology for this
device. The options are Disable and

Enable

AOC-2UR68-M2TS SLOT3 VMD

Select Enable to use the Intel Volume Management Device Technology for this
device. The options are Disable and

Enable

Hot Plug Capable

Use this feature to enable the hot plug support for PCIe root ports 2A–2D. The
options are Disable and

Enable

Intel® VMD for Volume Management Device for PStack2

Select Enable to use the Intel Volume Management Device Technology for this stack.

The options are Disable and

Enable

*If this feature is set to

Enable

, the following features are available.)

Summary of Contents for SuperServer 2029UZ-TN20R25M







































































































































































Search results

Summary of Contents for SuperServer 2029UZ-TN20R25M

Reviews:

Related manuals for SuperServer 2029UZ-TN20R25M

Brands by name

Popular brands

Supermicro SuperServer 2029UZ-TN20R25M, User Manual

Search results

Summary of Contents for SuperServer 2029UZ-TN20R25M

Reviews:

Related manuals for SuperServer 2029UZ-TN20R25M

Brands by name

Popular brands