SuperServer 2029UZ-TN20R25M User's Manual
114
Create namespace
Name
Press <Enter> to type in a name of namespace.
Region ID
This feature displays the region ID on which to create namespace.
Mode
Use this feature to set namespace mode. The options are
None
and Sector. The op-
tion, None, is for raw access only. Set this feature to Sector to guarantee powerfail write
automicity via a block translation table (BTT)
Capacity input
The options are
Remaining
and Manual. Set this feature to Remaining to use the maxi-
mum available capacity. Set this feature to Manual to enter the capacity manually.
Units
Use this feature to change the units of the input namespace capacity. The options are
B, MB, MiB, GB,
GiB
, TB, and TiB.
Capacity
This feature displays the capacity of namespace.
Create namespace
Press <Enter> to create a namespace with the above configuration.
Total capacity
The following information is displayed.
Total DCPMM resource allocation across the host server.
Raw capacity: 2.9 TiB
App Direct capacity: 1004.0 GiB
Memory capacity:
0 B
Unconfigured capacity:
0 TiB
Inaccessible capacity:
3.5 GiB
Reserved capacity: 1.9 TiB
Diagnostics
Perform diagnostic tests on DIMMS.
