55
Chapter 3: Maintenance and Component Installation
Adding an Expansion Card
The system supports an expansion card. A riser card provides one PCI Express 3.0 low-profile,
half-length x8 slot, connected to CPU2. (Labeled "1" below)
Figure 3-15. PCI Expansion Card Chassis Slots
1
Installing PCI Expansion Cards
1. Remove system power as described in Section 3.1 and remove the chassis cover.
2. Insert the expansion card into the adapter card slot while aligning the rear PCI shield
with the open slot in the chassis rear.
3. Secure the PCI shield with the sliding bracket on the rear of the chassis. Flip the black
plastic lever to secure the sliding bracket in place.
Figure 3-16. Expansion Card Slot on the Storage Adapter Card
PCI-E Slot on RSC-
UMR-8 Adapter Card
