Supermicro SC417BE1C-R1K23JBOD, User Manual

Page: 49 / 94

4-13
Chapter 4: Chassis Setup and Maintenance
3. Pull the power supply out using the handle provided.
4. Replace the failed power module with another of the same model.
5. Push the new power supply module into the power bay until it clicks into the
locked position.
6. Plug the AC power cord back into the module.
4-8 Control Board
The JBOD control board (CSE-PTJBOD-CB3) allows the user to remotely control
and monitor the chassis resources using IPMI, such as powering on or off, controlling
fan speeds and reading temperature data from the backplane. The location is shown
in the figure below.
Figure 4-15. Control Board Location