Supermicro SC417BE1C-R1K23JBOD, User Manual

Page: 39 / 94

4-3
Chapter 4: Chassis Setup and Maintenance
4-3 Cable Connections
IPMI
The SC417 JBOD chassis offers intelligent management with IPMI providing
hardware health monitoring and remote power control. To enable, connect to the
storage enclosure using the dedicated IPMI LAN connector (Figure 4-2).
For details on configuring and using IPMI, refer to the Supermicro IPMI manual.
Simple setup configuration:
IPMI default IP
: 192.168.1.99
User name : ADMIN
Password : ADMIN
Removing Power from the System
Before performing most setup or maintenance tasks, use the following procedure
to ensure that power has been removed from the system.
1. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply. If your system
has dual power supplies, remove the cords from both power supplies.
2. Disconnect the cord from the power strip or wall outlet.