Supermicro AS-1010P-8, User Manual

Page: 14 / 102

1-4
AS1010P-8(R)/1010P-T(R) User's Manual
Serial ATA Subsystem
For the 1010P-T and 1010P-TR, the SC816T-400/SC816T-R400 chassis was
designed to support four Serial ATA hard drives, which are hot-swappable units.
RAID 0 and RAID 1 levels are supported.
Note: The system's operating system must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
PCI Expansion Slots
The 1010P-8(R)/1010P-T(R) accommodates the the use of one standard size 133
MHz PCI-X or PCI-Express x8 add-on card and one low profi le 100 MHz PCI-X or
PCI-Express x8 add-on card (all with riser cards). See Section 5-6 for details.
Front Control Panel
The SC816S-(R)400/SC816T-(R)400's control panel provides you with system
monitoring and control. LEDs indicate UID, system power, HDD activity, network
activity (2) and overheat/fan failure. A main power button and a UID button are
also included.
I/O Backplane
Ports on the I/O backplane include one COM port, a VGA port, two USB ports, PS/2
mouse and keyboard ports, two gigabit Ethernet ports and a UID button/LED. An
external SCSI port is also included on the AS1010P-8/1010P-8R server.
Cooling System
The SC816S-(R)400/SC816T-(R)400 chassis has an innovative cooling design that
features three sets of 4-cm counter-rotating fans located in the middle section of
the chassis. There is a "Fan Speed Control Mode" setting in BIOS (see Chapter
7) that allows chassis fan speed to be determined by system temperature [recom-
mended setting is "3-pin (Server)]. The power supply module(s) also includes a
cooling fan.