Supermicro AS-1010P-8, User Manual

Page: 13 / 102

1-3
Chapter 1: Introduction
Onboard Controllers/Ports
One fl oppy drive controller and a single-channel ATA/100 controller are provided
to support up to two IDE hard drives or ATAPI devices. The color-coded I/O ports
include one COM port, a VGA (monitor) port, two USB 2.0 ports, PS/2 mouse
and keyboard ports and two gigabit Ethernet ports. An external SCSI port is also
included on the H8SSP-8.
ATI Graphics Controller
The H8SSP-8/H8SSP-i features an integrated ATI video controller based on the
Rage XL graphics chip. Rage XL fully supports sideband addressing and AGP
texturing.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Server Chassis Features
The 1010P-8(R)/1010P-T(R) is built upon the SC816S-(R)400/SC816T-(R)400 1U
server chassis (1010P-8 = SC816S-400, 1010P-8R = SC816S-R400, 1010P-T =
SC816T-400, 1010P-TR = SC816T-R400). The following is a general outline of the
main features of the SC816S-(R)400/SC816T-(R)400 chassis.
System Power
The 1010P-8 and 1010P-T feature a single 400W cold-swap power supply. Power
must be removed from the system before servicing or replacing the power supply.
The 1010P-8R and 1010P-TR feature a redundant 400W hot-swap power supply.
Power does not need to be removed from the system before servicing or replacing
one of the two power supply modules.
SCSI Subsystem
The SC816S-400/SC816S-R400 chassis was designed to support four SCSI hard
drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SCSI drives.