Supermicro AS-1010P-8, User Manual

Page: 12 / 102

1-2
AS1010P-8(R)/1010P-T(R) User's Manual
1-2 Serverboard Features
At the heart of the 1010P-8(R)/1010P-T(R) lies the H8SSP-8/H8SSP-i, a single
processor serverboard based on the ServerWorks HT-2000/1000 chipset. Below
are the main features of the H8SSP-8/H8SSP-i (see Figure 1-1 for a block diagram
of the chipset).
Processors
The H8SSP-8/H8SSP-i supports a single AMD Opteron 200 series 64-bit processor
in a 940-pin microPGA ZIF socket.
Memory
The H8SSP-8/H8SSP-i has four 184-pin DIMM sockets that can support up to 16
GB of registered ECC DDR333/266 or up to 8 GB of registered ECC DDR400
SDRAM. Memory can be installed in either a single or a dual channel (interleaved)
confi guration, which requires modules of the same size and speed to be installed
in pairs. Please refer to Chapter 5 for details on installing memory.
SCSI Subsystem
The H8SSP-8 (only) includes onboard Adaptec AIC-7902W dual-channel SCSI
controller, which supports four 80-pin SCA Ultra320 SCSI hard drives (SCA =
Single Connection Attachment). The SCSI drives are connected to a backplane
that provides power, bus termination and confi guration settings. The SCSI drives
are hot-swappable units.
Serial ATA Subsystem
The H8SSP-8/H8SSP-i includes a SATA controller, which is integrated into the
ServerWorks HT-1000. This controller supports four SATA hard drives. The SATA
drives are connected to a backplane that provides power, bus termination and
confi guration settings. The SATA drives are hot-swappable units.
One (1) passive heatsink for 1U systems (optional, SNK-P0012)
One (1) CD containing drivers and utilities
Note: (B) indicates the item is available in black.