Series Premier VS-VH
Page 23
LT135 Dec 2019
Figure 12: Tube and Reflector Hanger Detail
5. Join consecutive pieces of Tube using Couplings. Insert one end of both Tubes fully into the Coupling. (Refer to
Figure 13). These should be tightened as the Tubing is put in place, as it is more difficult to do so once the
Reflector is installed. Tighten band clamps alternately to prevent buckling of the sleeve, set to Torque listed.
Ensure that the weld seams on ALL Tubes are facing down.
Figure 13: Tube Coupling Installation
