manualshive.com logo in svg

Super Circuits DVQ-2, User Manual

Share
Download
Super Circuits DVQ-2 User Manual Download Page 32

5.12 Network

See Network Section in this manual, page 36.

5.13 Backup

The backup fi le can be played in a PC using the supplied licensed Video Server 

software

.  Other 

media players

like Windows Media Player or RealPlayer. can be used after the fi le is converted to an “

AVI

” format.  See Video Backup 

Player page 42. 

Note: 

 Backing up from the network requires the supplied AP software on the CD.

Note: 

Use CH1 for video with audio backup only.

     ADVANCE

  

 

CAMERA

   DETECTION
   DISPLAY
   ALERT
   REMOTE
   SYSTEM
   NETWORK
   

BACKUP

   HDD INFO
   EVENT LOG

     BACKUP

   USB BACKUP
   DISK BACKUP

1)  USB BACKUP (USB backup is not available on this model)

Before making a USB backup, please check if the:
a)  USB fl ash drive is supported.  If the USB fl ash is not supported you will get a error message “USB ERROR”.
     For a list of the compatible USB fl ash drives, please refer to APPENDIX 5 Compatible USB Flash Drives page 63.

b)  Format USB fl ash drive using “FAT 32” using your PC.
c)  Verify USB fl ash drive is clear of all data before back up.  Move the cursor to “BACKUP”, and press ”ENTER”. 

     BACKUP

  

 USB BACKUP

   DISK BACKUP

                  USB BACKUP

 
   START TIME           2006 – 12 – 01 21 : 35 : 00
   END TIME               2006 – 12 – 01 21 : 45 : 00
   AVAILABLE SIZE    1.460 GB

   CHANNEL               

•

 01 

•

 02 X 03 X 04

   HDD NUM               HDD-MASTER-1
   BACKUP TO USB   START

•  START TIME 
   Select the start time for backup.

•  END TIME
   Select the end time for backup.

32

Summary of Contents for DVQ-2


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands