NOTE:
When using an LCD monitor, and the
“MONITOR OUT” setting in the “DISPLAY” menu
is set to “MAIN”, the motion detection area
setting will be disabled.
(3.) Detection Timer
Move the cursor to “DETECTION TIMER”, and press ”ENTER”. Set the date, start time and end time for motion detection.
5.8 Display
Change display settings. Select “DISPLAY”, and press ”ENTER”. (MENU> ADVANCE> DISPLAY)
1) TITLE DISPLAY
Select to display the channel title (ON / OFF).
2) DATE DISPLAY
Select to display the date (ON / OFF).
3) HDD INFO
Select to display HDD remaining capacity information (ON / OFF).
ADVANCE
CAMERA
DETECTION
DISPLAY
ALERT
REMOTE
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
DISPLAY
TITLE DISPLAY ON
DATE DISPLAY ON
HDD INFO ON
LOSS SCREEN BLUE
PLAYBACK INFO NORMAL
DWELL DURATION (SEC) 2
DE-INTERLACE ON
MONITOR OUT MAIN
OSD SETUP
WATERMARK ON
DETECTION
DETECTION SETUP
DETECTION TIMER
DETECTION TIMER
DATE START END
OFF 00 : 00 - 00 : 00
DAILY 08 : 00 - 18 : 00
SUN 06 : 00 - 23 : 00
MON-FRI 18 : 00 - 23 : 00
OFF 00 : 00 - 00 : 00
OFF 00 : 00 - 00 : 00
OFF 00 : 00 - 00 : 00
ADVANCE
CAMERA
DETECTION
DISPLAY
ALERT
REMOTE
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
DISPLAY
TITLE DISPLAY ON
DATE DISPLAY ON
HDD INFO ON
LOSS SCREEN BLUE
PLAYBACK INFO NORMAL
DWELL DURATION (SEC) 2
DE-INTERLACE ON
MONITOR OUT MAIN
OSD SETUP
WATERMARK ON
28