SWTL4510 Operation Manual
54
6 MAINTENANCE
6.1 REQUIREMENT SERVICE
The machine has been designed and manufactured for giving the maximum autonomy with a
minimum of maintenance. Before sell the machine SUNWARD has test the machine to ensure
an optimum working of the machine. To keep the machine in good working it is recommended
to do maintenance program describes in this manual. In the following items it is described how
to do the maintenance and in which intervals. For maintaining the efficiency of the machine it is
recommended that only specialized person from SUNWARD SERVICE do the maintenance
task, since they have the necessary tools to do the maintenance correctly and secure. All the
services done to the machine has to be registered in a register table given with the machine.
Only stuff from SUNWARD has the capacity to fill up the register table.
6.2 ADVICE FOR THE MAINTENANCE
•
Keep the machine always clean and tidy up. It makes much easier to find out troubles.
•
Follow the recommendations given in the section 2 “security” to ensure your security
and the security of the people around you.
•
Before open the engine hood makes sure all the security devices are engaged and the
engine is stopped.
•
Lower the boom and bucket to the ground when you need to check the hydraulic system.
•
Apply the parking brake when go out from the machine.
•
Raise the cabin following the recommendation .
•
Use always the recommended oil and grease given in this manual.
•
Before carries out any maintenance put warning plate for ensure that nobody switch on
the machine.
•
Make sure you carry out the maintenance in a secure and flat place.
•
Check and change the oil in a clean place to prevent that dust or impurities get into the
tank.
•
Wait after the hydraulic oil cool down to do any maintenance work.
•
Never use flammable fluids to clean the machine.
•
Never spray high pressure to the radiator, since you can damage it.
•
Never spray water directly inside the cabin, since you can wet the electric system
connectors or wetting the ignition switch.
•
When working in dusty environment check air filter, radiator, filters and electric
components more often than in usual.
•
Take care before using the machine in mud or rainy whether to carry out a general
lubrication. Clean the machine immediately after work under damp conditions in order to
protect the different components from rust.
•
Use the oil recommended in this manual. Use another kind of oil could damage the
machine. It is recommended to not mix the oil form different brands, neither for top up
the different levels of oils.
•
Follow the current regulation for throwing out oils, filters, coolants and batteries, since
they can damage the environment.
