SWTL4510 Operation Manual
34
3)
Restrain bar
A: The restrain bar is extremely important for the
safety of operation. It will be a protection for the
operator for avoid jump forward in case of sudden
stop while traveling.
B: It is also the safety device to lock the joysticks
control. When it is lifted to vertical position, the
joysticks will be out of order. To release the lock,
you have to lower the restrain bar to horizontal
position. The locking function is obtained by a
sensor located closed to the support of restrain bar.
4)
Foot accelerator
The foot accelerator is on
the right side of the operator. Operator can
operate the foot accelerator via his right foot
easily. Foot accelerator is for adjusting engine
speed and power together with hand
accelerator. The foot accelerator lever will
return to its limit position after the operation finish.
5)
Hand accelerator
Be same as foot accelerator, the hand accelerator is on the right
side of the operator. Operator can operate the hand accelerator via his right hand
easily. Operator can adjust engine speed and power via hand accelerator and fit it to
constant level.
6)
Auxiliary device control pedal
The auxiliary device control pedal is positioned in
front of operator. It is to open and close the oil flow to the auxiliary device. One
safety guard is over the auxiliary device control pedal. Lift the safety guard before
use it. One locking lever is positioned on the left side of this pedal which put forward
is for maintain the pedal position.
The auxiliary device control pedal has three operation positions:
•
Middle
---Neutral.
•
Left
---Open for normal hydraulic circuit and control bi-directional
flow together with right.
•
Right
---Together with left for bi-directional flow control.
4.7
SWITCHES AND BUTTONS
Switches inside the cabin
1)
Ignition key and switch
There is one ignition switch located on the right joystick
support. This rotary switch has four fixed positions. The marks and functions for the
four positions are indicated in the following table.
