SWTL4510 Operation Manual
53
Only use cable strong enough to remove the machine.
Release the parking brake before towing.
Never tow the machine for long distance.
When the machine is stuck in mud or out of order, we need other equipments to remove the
machine. Use a cable strong enough trough the towing hook in the rear side of the machine to
remove the machine.
5.21 STARTING THE MACHINE WITH BOOSTER CABLES
Read carefully the safety regulations before perform starting the machine with booster cables.
Always follow with the safety regulations strictly.
•
Make sure the voltages of the two machines are same and the aiding battery is with
greater or at least same capacity.
•
Make sure the booster cables are enough for the current and with good condition.
•
When connecting the cables, avoid any contact between the two terminals (+ and -).
For connecting the booster cables and starting the machine, proceed as follow:
1)
Approach the two machines and get a proper distance to connect the booster
cables. But keep the two machines not touch.
2)
Connect the positive terminals (+) of the two machines with one cable.
3)
Connect the negative terminals (-) of the aiding battery to the earth block of
engine of the machine with the depleted battery.
4)
Start the engine of the machine with the aiding battery and increase its speed.
5)
Start the engine of the machine with the depleted battery.
For disconnecting the booster cables after start the machine:
1)
Disconnect the connection of the negative (-) from the engine earth block and
later disconnect battery connection.
2) Disconnect the connection of positive first from the aiding battery and later
disconnect aiding battery connection.
