80-0084-00-RevB SunTech Vet30E User Manual | 11
2019-12-04
Place the Vet30E
monitor in a convenient location to ensure user’s ability to monitor the screen continuously.
Ensure
monitor is placed away from table top edges and route the patient cables so that if pulled, the monitor will not fall.
3.3 Front Panel
3.4 Connect Power, Hose, and Sensors
CAUTION:
Read all warnings, cautions, and instructions provided prior to using the device.
1.
Insert AC adapter plug into the Vet30E. Plug other end of the AC adapter into a power supply to begin charging
the battery. Only use AC Adapter supplied by SunTech Medical.
WARNING:
The AC adapter must be unplugged and the battery must be disconnected in order to completely
disconnect device from power.
See Section 10.2 for information on battery disconnection.
2.
Connect the patient hose to the back of the monitor making sure the connec
tor “clicks” into the locking position
by rotating clockwise.
For additional information on how to take a BP measurement, see Section 5.
Power button.
Press once to turn ON. The button is illuminated when power is on.
To turn OFF, press the button again.
Start/Stop button.
Starts BP measurement. Stops
measurement at any time.
AC Adapter
