Doc. Title
ST940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST940
1.19
0
19-06-15
15
51 of 51
10.4. How to output GPS NMEA in a form of STRING
The NMEA data can be received via GPS session by using a USB Cable of device and can be output in a form of
STRING.
The NMEA data that can be output is:
$GPRMC / $GPGGA /$GPGSV / $GPGLL / $GPVTG
In such a case, the following commands are used:
AT$GPSLCL=1 : It outputs ENABLE.
AT$GPSLCL=0 : It outputs DISABLE.
You need to use a communication port,
“
MTK USB Modem Port(COMY)
”, as shown in the picture below.
-
The End of the document -
