Doc. Title
ST940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST940
1.19
0
19-06-15
15
34 of 51
[command] ST910;GpsOffMov=1;
456789
[response] ST910;RES;GpsOffMov =1;
456789
[command] ST910;GpsOffMov=1;123456789
[response] ST910;RES;GpsOffMov =1;123456789
(Note):
In a case that user utilizes this option (
“1” to be selected in the SyncTrak, a setting tool of Suntech) which
is operational only while the device (in a vehicle, for example) is moving, power of the battery can be consumed less
than in a case that this option is not selected. If this option is selected, however, some of information (e.g. information
about vehicle speed, information about distance) might not be highly precise.
ReqGpsOffMov
This command is used to request the device to report about what information
‘GpsOffMov’ has.
Field
Marks
Value Meaning
HDR
“ST910”
Model Name
COMMAND
“ReqGpsOffMov”
Command Type
DEV_ID
6 or 9 char.
Digits ID of device. It is a part of IMEI. Please check the
“DEV_ID_TYPE” setting.
<Example>
[command] ST910;ReqGpsOffMov;
456789
[response] ST910;RES;ReqGpsOffMov;0;
456789
[command] ST910;ReqGpsOffMov;123456789
[response] ST910;RES;ReqGpsOffMov;0;123456789
SetProtType
.
Once this command is made, some interactions will be set the protocol type as described in the ‘Meaning’ section of
the table below.
Depends on the selected protocol type, different the report format as described in this document.
